How to Use HP DMI Tool to Update System BIOS
How to Use HP DMI Tool to Update System BIOS
HP DMI Tool is a utility that allows you to update or restore the system BIOS on your HP desktop or notebook PC. It can also be used to program some information into the system board, such as product name, serial number, SKU, etc. This information is required for warranty and service purposes.
In this article, we will show you how to use HP DMI Tool to update your system BIOS and fix some common errors that may occur during the process.
Hp Dmi Slp V 14d Rar
What You Need
A DOS bootable disk or USB drive. You can create one using Rufus or HP USB Disk Storage Format Tool.
The HP DMI Tool file. You can download it from here. The file name is Hp Dmi Slp V 14d Rar.
The latest BIOS file for your HP model. You can find it on the HP support website.
How to Use HP DMI Tool
Extract the Hp Dmi Slp V 14d Rar file and copy it to your DOS bootable disk or USB drive.
Copy the BIOS file to the same disk or drive.
Boot your HP PC from the DOS disk or drive.
At the command prompt, type HPBQ138 and press Enter. This will launch the HP DMI Tool.
Select 1 to start programming.
Select 1 again to program all items.
Enter the required information for each item. You can find them on the sticker at the bottom of your laptop or on the side of your desktop. If you are not sure, you can leave them blank or use the default values.
When you are done, press S to save and exit.
Type dir and press Enter to see the list of files on your disk or drive.
Type the name of your BIOS file and press Enter to start flashing your BIOS.
Wait for the process to complete. Do not turn off or restart your PC during this time.
When you see a message saying Bios Update Successful, press any key to reboot your PC.
Troubleshooting Tips
If you encounter any errors or problems while using HP DMI Tool, here are some tips to help you:
If you see a message saying Product Information Not Valid, it means that some information on your system board is missing or invalid. You need to use HP DMI Tool to program it correctly.
If you see a message saying Error: MPM is locked, it means that your system board is locked and cannot be programmed. You need to contact HP support for assistance.
If you see a message saying Error: SMC Command Failure, it means that there is a communication problem between your PC and the tool. You need to check your disk or drive for errors or try another one.
If you see a message saying Error: Flashing Failed, it means that there is a problem with your BIOS file or your PC. You need to download the latest BIOS file from HP website or try another PC.
29c81ba772
https://www.cissbigdata.org/group/trial-group/discussion/fd79fa2f-3126-409a-86fb-b8b09c0fbfc3