How To Install OPCOM USB V2 Driver On Windows 7 32-bit ~REPACK~
How to Install OPCOM USB V2 Driver on Windows 7 32-bit
If you are looking for a way to install OPCOM USB V2 driver on Windows 7 32-bit, you have come to the right place. OPCOM USB V2 is a diagnostic tool that allows you to communicate with your Opel/Vauxhall vehicles. It can perform various functions such as reading and clearing fault codes, displaying live data, programming and testing.
How to Install OPCOM USB V2 Driver on Windows 7 32-bit
However, before you can use OPCOM USB V2, you need to install the driver on your computer. This can be tricky if you are using Windows 7 32-bit, as the driver is not compatible with this operating system by default. In this article, we will show you how to install OPCOM USB V2 driver on Windows 7 32-bit step by step.
Step 1: Download OPCOM USB V2 Driver
The first thing you need to do is to download the OPCOM USB V2 driver from the official website. You can find the link here. The file size is about 3.5 MB and it is in ZIP format. Save it to a location that you can easily access later.
Step 2: Extract OPCOM USB V2 Driver
The next thing you need to do is to extract the OPCOM USB V2 driver from the ZIP file. You can use any software that can handle ZIP files, such as WinRAR or 7-Zip. Right-click on the ZIP file and choose Extract here or Extract to opcom-usb-v2-driver. You should see a folder named opcom-usb-v2-driver with several files inside.
Step 3: Connect OPCOM USB V2 to Your Computer
The third thing you need to do is to connect OPCOM USB V2 to your computer using a USB cable. Make sure that your computer is turned on and that you have administrator rights. You should see a notification that says Installing device driver software on the bottom right corner of your screen. Wait for a few seconds until it says Device driver software was not successfully installed. This is normal, as Windows 7 32-bit does not recognize the driver automatically.
Step 4: Update OPCOM USB V2 Driver Manually
The fourth thing you need to do is to update OPCOM USB V2 driver manually. To do this, follow these steps:
Click on the Start button and type device manager in the search box. Press Enter or click on Device Manager from the list of results.
In Device Manager, look for a device named Unknown device or OP-COM USB V2 with a yellow exclamation mark next to it. This is your OPCOM USB V2 device.
Right-click on the device and choose Update Driver Software.
Choose Browse my computer for driver software.
Click on Browse and navigate to the folder where you extracted the OPCOM USB V2 driver in Step 2. Select the folder and click OK.
Click on Next and wait for the installation process to complete. You should see a message that says Windows has successfully updated your driver software.
Click on Close and restart your computer.
Step 5: Test OPCOM USB V2 Driver
The fifth and final thing you need to do is to test OPCOM USB V2 driver. To do this, follow these steps:
Open Device Manager again and check if your OPCOM USB V2 device is recognized correctly. It should be under Ports (COM & LPT) and have a name like USB Serial Port (COMx) where x is a number.
Note down the COM port number of your OPCOM USB V2 device. You will need it later.
Run the OPCOM software that came with your device or download it from here. The file size is about 25 MB and it is in ZIP format.
Extract the OPCOM software from 04f6b60f66